Toro 10176SL Service Manual Models 30448 30446 Groundsmaster 4000 4010 D D Preface

Removal (Fig. 5)
Position machine on  a clean, level surface.  Lower
1.
cutting decks, stop engine, apply parking brake and re-
move key from the ignition switch.
3
2.
ting Deck Motor  Removal in the  Service and Repairs
Section of Chapter 4 -- Hydraulic System).
Remove hydraulic motor from cutting deck (see Cut-
IMPORTANT: Donotchangethelengthofthedamp-
er link (Fig. 8).
1
1
3.
er link to the rear of the cutting deck (Fig. 8).
Remove hairpin and clevis pin thatsecure thedamp-
2
4.
washers thatsecure deck mount to cutting deck (Fig. 6).
Remove eight (8) cap screws, lock washers and flat
Figure 6
3.
1.
2.
Flange head screw
Hydraulic motor
Deck mount screw
5.
Raise lift arm enough to separate deck mount from
cutting deck (Fig. 7).
6.
Slide the cutting deck away from the traction unit.
Installation (Fig. 5)
Position machine  on  a clean,  level surface.  Stop
1
1.
engine, apply parking brake and remove  key from the
ignition switch.
3
2.
mount.
Position the side cutting deck to the lift arm and deck
2
3.
Lower lift arm while  aligning deck mount to cutting
deck.
Figure 7
4.
screws, lock washers and flat washers (Fig. 6). Tighten
fasteners.
Install  deck  mount  to  cutting  deck  with (8)  cap
1.
2.
Lift arm (LH shown)
Damper link
3.
Deck mount
IMPORTANT: The length of the damper link should
be from 5.295” to 5.445” (134 to 138 mm) measured
between rod end centers.
5.
link to the rear of the cutting deck (Fig. 8).
Install clevis pin and hairpin that secure the damper
6.
Deck Motor Installation in the Service and Repairs Sec-
tion of Chapter 4 -- Hydraulic System).
Install hydraulic motor to  cutting deck (see Cutting
1
5.295”
to 5.445”
7.
Lubricate grease fittings on cutting deck and lift arm
(134 to 138mm)
assembly.
2
Figure 8
1.
Damper link
2.
Clevis pin
Groundsmaster 4000--D/4010--D
Page 8 -- 9
Cutting Decks
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 340 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website