Toro 10176SL Service Manual Models 30448 30446 Groundsmaster 4000 4010 D D Preface

Procedure for Cutting Deck Circuit Pressure Test
Make sure hydraulic oil is at normal operating tem-
1.
perature  by  operating  the  machine  under  load  for
approximately ten (10) minutes. Make sure the hydrau-
lic tank is full.
2.
decks lowered and off. Make sure engine is off and the
parking brake is applied.
Park machine  on  a level  surface with  the cutting
1
CAUTION
Figure 39
Prevent personal injury and/or damage to equip-
ment. Read all WARNINGS, CAUTIONS and Pre-
cautions for Hydraulic Testing at the  beginning
of this section.
1.
Front deck circuit pressure test port
3.
draulic hose attached to manifold test port for the deck
to be tested (Figs. 39, 40 and 41).
Install 5000 PSI (350 bar) pressure gauge with hy-
CAUTION
1
Cutting  deck blades  will  rotate when  lowered
with PTO switch in ON position. Keep away from
cutting decks during test to prevent personal in-
jury from rotating blades. Do not stand in front of
the machine.
Figure 40
Right deck circuit pressure test port
1.
4.
(2870
Start engine  and move throttle  to high  idle speed
RPM). Engage the cutting decks.
5.
Watch pressure gauge carefully while mowing with
the machine.
6.
and will vary depending on mowing conditions:
Cutting deck circuit  pressure should be  as follows
LH Deck: 1000 to 3000 PSI (69 to 207 bar)
Front Deck: 1000 to 3000 PSI (69 to 207 bar)
RH Deck: 1000 to 2000 PSI (69 to 137 bar)
1
7.
test results.
Disengage cutting decks. Shut offengine and record
Figure 41
1.
Left deck circuit pressure test port
8.
gauge with hose from manifold test port.
When  testing  is completed,  disconnect  pressure
Groundsmaster 4000--D/4010--D
Page 4 -- 51
Hydraulic System
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 340 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website