Removal (Fig. 60)
CAUTION
CAUTION
Use eye protection such as goggles when using
compressed air.
The radiator and oil cooler may be hot. To avoid
possible burns, allow the engine and cooling
systems to cool before working on the oil cooler.
2.
opposite direction of the oil flow.
Dry inside of oil cooler using compressed air in the
3.
Make sure fins are clear of dirt and debris.
Plug both ends of oil cooler. Clean exterior of cooler.
1.
Park machine on a level surface, lower cutting
decks, stop engine, apply parking brake and remove
key from the ignition switch.
4.
The oil cooler should be free of corrosion, cracked
tubes and excessive pitting of tubes.
2.
Read the General Precautions for Removing and
Installing Hydraulic System Components at the begin-
ning of the Service and Repairs section of this chapter.
Installation (Fig. 60)
1.
2.
Install oil cooler using Figure 60 as a guide.
Fill reservoir with hydraulic fluid as required.
3.
Remove oil cooler using Figure 60 as a guide.
Inspection
1.
er is clean, make sure all solvent is drained from the
cooler.
Backflushoilcoolerwithcleaningsolvent.Aftercool-
Groundsmaster 4000--D/4010--D
Page 4 -- 79
Hydraulic System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 10176SL, Toro Groundsmaster 30446, Toro Groundsmaster 30448, Toro Groundsmaster 4010 D |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)