Toro 10176SL Service Manual Models 30448 30446 Groundsmaster 4000 4010 D D Preface

3.
4.
grooves in the wear plates. Follow by carefully placing
the  backup gaskets,  flat  side outward,  between  the
pressure seals and the grooves in the wear plate.
Place front flange, seal side down, on a flat surface.
Install the pressure seals, flat side outward, into the
10.Install locating dowels in body. Align marker line on
the body and front flange.
IMPORTANT: Do not dislodge seals during installa-
tion.
11.
Gently slide the body onto the assembly. Firm hand
5.
Applyalightcoatingofpetroleumjellytotheexposed
pressure should be sufficient to engage the dowels.
side of the front flange.
12.Install
tighten.
thefour(4)capscrewswithwashers    andhand
6.
Lubricatethedrivegearshaftwithcleanhydraulicoil.
Insert the drive end of the drive shaft through the wear
platewiththepressuresealsidedownandtheopenside
of the pressure seal pointing to the inlet side of the mo-
tor. Carefully install shaft into front flange.
IMPORTANT: Prevent  damage when clamping  the
fan motor into a vise; clamp on the front flange only.
Also, use a vise with soft jaws.
13.Place
jaws and alternately torque the cap screws 33 ft--lb (45
N--m).
front flange of the motor into a  vise with soft
7.
Lubricate the idler gear shaft with clean hydraulic oil.
Install idler gear shaft into the remaining position in the
front wear plate. Apply a light coating of clean hydraulic
oil to gear faces.
14.Remove
motor from vise.
8.
open side of the pressure seal pointing to the inlet side
of the motor.
Install rear wear plate with pressure seal side up and
15.Place
asmallamountofcleanhydraulicoilintheinlet
ofthemotorandrotatethedriveshaftawayfromtheinlet
one revolution. If any binding is noted, disassemble the
motor and check for assembly problems.
9.
Apply a  light coating of petroleum  jelly to new  O--
rings and O--ring  grooves in the body.  Install new O--
rings to the body.
Hydraulic System
Page 4 -- 122
Groundsmaster 4000--D/4010--D
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 340 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website