Disassembly (Fig. 54)
7. Remove piston.
IMPORTANT: Prevent damage when clamping the
cylinder’s barrel into a vise; clamp on the clevis
only. Do not close vise enough to distort the barrel.
8. Remove all seals and O-rings.
9.
Wash parts in a safe solvent. Dry parts with com-
pressed air.DONOTwipethemdrywith acloth orpaper
as lint and dirt may remain.
1.
After removing cylinder, pump oil out of cylinder into
a drain pan by SLOWLY moving rod and piston in and
out of cylinder bore.
10.
Carefully inspect internal surface of barrel for dam-
age (deep scratches, out-of-round, etc.). Replace entire
cylinderifbarrelisdamaged.Inspectpistonrod,andpis-
ton for evidence of excessive scoring, pitting, or wear.
Replace any damaged parts.
2.
Plug ports and clean outside of cylinder.
3.
is tilted up slightly. Do not close vise so firmly that cylin-
der tube could become distorted. Loosen gland.
Mount cylinder in a vise so piston rod end of cylinder
Assembly (Fig. 54)
4.
Remove gland retaining ring.
1. Use a complete repair kit when rebuilding the cylin-
der. Put a coating of oil on all new seals and O-rings.
Install the new seal and O-rings.
5.
motion to carefully extract piston, piston rod, and head
from cylinder barrel.
Grasp end ofpiston rod and use atwisting and pulling
2. Install piston onto piston rod with O-ring seal (item 9)
and tighten hex nut.
IMPORTANT: Do not clamp vise jaws against the
shaft surface. Protect shaft surface before mount-
ing in a vise.
3. Put a coating of oil on all cylinder parts to ease as-
sembly.
6.
Securely mount piston, piston rod, and head into vise
4. Slide piston rod assembly into cylinder tube.
and remove nut.
5.
Install gland and retaining ring.
Reelmaster 6500-D/6700-D
Page 4 - 85 Rev. E
Hydraulic System
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro Reelmaster 6500-D, Toro Reelmaster 6700-D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Engine Manufacturer | Toro |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)