Groomer Reel Service
Inspect groomer reel blades frequently for damage and
wear.Straightenbentbladeswithapliers.Eitherreplace
worn blades or reverse the blades to put the sharpest
blade edge forward (Fig. 7). Blades that are rounded to
the midpoint of the blade tip must be reversed or re-
placed for best groomer performance.
3
2
Disassembly (Fig. 8)
4
1.
Remove groomer reel from cutting unit (see Groom-
er Reel Removal in this section).
2.
3.
4.
Remove seal guards from groomer reel.
Remove lock nut from either end of the shaft (Fig. 8).
Remove spacers and blades from groomer shaft. If
1
GROOMER
ROTATION
needed, remove second lock nut from shaft.
Assembly (Fig. 8)
Figure 7
1.
Install lock nut on drive end of groomer shaft. Place
1.
2.
Groomer blade
Location mark
3.
4.
Sharp edge
Dull (rounded) edge
first spacer and then first blade on shaft. Adjust location
of lock nut so first blade is 6.850” (174 mm) from drive
end of groomer shaft (Fig. 9).
200
to 250 in--lb
to 28.3 N--m)
(22.6
2.
Alternately install remaining spacers and blades
making sure that all blades are separated by a spacer.
Additionally,rotatelocationmarkoneachinstalledblade
one flat of the shaft, either in a clockwise or counter-
clockwise direction. The direction of location mark rota-
tion must remain constant on the shaft.
2
3
1
4
3.
spaceronshaftandthenthreadsecondlocknutontothe
shaft.
When all blades have been installed, place final
Figure 8
4.
Using wrench on shaft flats to prevent shaft from
turning, torque second lock nut from 200 to 250 in--lb
to 28.3 N--m). After torquing lock nut, spacers
should not be free to rotate.
1.
2.
Groomer reel shaft
3.
Spacer (42 used)
Lock nut (2 used)
(22.6
Groomer blade (41 used)
4.
5.
Place seal guards on groomer shaft. Position seal
1
.740”
2
6.850”
guard on drive end of shaft (with key slot) 3.570” (90.7
mm) from shaft end. Position seal guard on non--drive
end of shaft 1.740” (44.2 mm) from shaft end (Fig. 9).
(
44.2 mm)
(174 mm)
3.570”
(90.7
mm)
6.
Install o--ring on non--drive end of groomer shaft.
7.
er Reel Installation in this section).
Install groomer reel back on cutting unit(seeGroom-
6
2
1
5
5
3
4
Figure 9
1.
2.
3.
Groomer shaft
Lock nut
Spacer (42 used)
4.
5.
6.
Blade (41 used)
Seal guard
O--ring
Groomer (Rev. C)
Page 7.1 -- 8
Reelmaster 6500--D/6700--D
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro Reelmaster 6500-D, Toro Reelmaster 6700-D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Engine Manufacturer | Toro |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)