Leveling Rear Roller
The precision machined components of the cutting unit
frame keep the rear roller and cutting reel in alignment
(parallel). If the side plates are disassembled or as the
cutting reel wears, a limited amount of side plate adjust-
ment is possible to make sure that the cutting unit is
properly aligned.
3
2
4
1
1.
2.
Place the assembled cutting unit on a surface plate.
Make sure that bedknife is properly adjusted to cut-
4
ting reel.
3.
Using the surface plate, check if rear roller is level to
cutting reel by using a 0.005” (0.13 mm) shim at each
end of rear roller. If the shim will pass under the roller at
one end but not the other, a frame adjustment should be
made.
Figure 12
1.
2.
Bedbar
3.
Spring tension lock nut
Shoulder bolt
Bedbar adjuster screw
4.
4.
bolts that secure the side plate to the frame opposite the
side that is not level (Fig. 12).
Loosen, but do not remove, the three (3) shoulder
4
1
5.
rear roller and cutting reel. Then, tighten the shoulder
Adjust the position of the side plate to parallel the
bolts to a torque from 27 to 33 ft--lb (37 to 44 N--m).
5
6.
Aftertighteningthesideplate,rechecktherearroller.
If necessary, loosen and adjust second side plate.
7.
If rear roller is still not level after adjusting both side
plates, check to see if cutting reel is tapered (see Pre-
paring Reel for Grinding in the Service and Repairs sec-
tionofthischapter). Ifcutting reelis nottapered andrear
roller isnotlevel, a0.010” shim(part number 107--4001)
is available to allow additional rear roller adjustment.
Use the shim on one side of the rear roller and install it
between the rear roller bracket and roller shim (Fig. 13).
6
2
3
Figure 13
8.
and adjustment sequence.
Afterlevelingrearroller,completecuttingunitset--up
1.
2.
3.
Rear roller assembly
Rear roller bracket
Carriage screw
4.
5.
6.
Flange nut
Roller shim
0.010” shim (if needed)
Reelmaster 6500--D/6700--D
Page 7.2 -- 13 Rev. E
DPA Cutting Units
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro Reelmaster 6500-D, Toro Reelmaster 6700-D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Engine Manufacturer | Toro |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)