Maintenance
Changing Planetary Gear Drive Lubricant
Planetary gear drive lubricant should be changed every
800
hours of operation. There are 2 separate oil reser-
voirs (oneforeachfrontwheel) thatrequire draining and
refilling with SAE 85W-140 gear lube.
1.
check/drain plug is at lowest position (Fig. 1).
With machine on level surface, position wheel so the
1
2.
housing and allow the oil to drain (Fig. 2).
Remove both plugs from the bottom of the brake
3.
Whenalloftheoilhasdrained,installthebottomplug
in the brake housing.
4.
or two o’clock position on the planetary.
Position the wheel so that the plug hole is at the ten
Figure 1
Planetary Drive Housing drain plug
(shown at 9 o’clock position)
1.
5.
Slowly add approximately 16 oz. (0.5 l) of high quali-
ty SAE 85W-140 gear lube to the planetary fill hole (at
the ten or two o’clock position) until the level is up to the
bottom of the brake housing check hole. Install the plug.
6.
Repeat the procedure on the opposite planetary/
brake assembly.
2
1
Figure 2
1.
Drain Plug Location
2. Check Plug Location
Reelmaster 6500-D/6700-D
Page 6 - 3
Axles, Planetaries and Brakes (Rev. C)
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro Reelmaster 6500-D, Toro Reelmaster 6700-D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Engine Manufacturer | Toro |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)