Disassembly (Fig. 55)
5. Remove all seals and O-rings.
IMPORTANT: Prevent damage when clamping the
cylinder’s barrel into a vise; clamp on the clevis
only. Do not close vise enough to distort the barrel.
6. Wash part in a safe solvent. Dry parts with com-
pressed air.DONOTwipethemdrywith acloth orpaper
as lint and dirt may remain.
1.
After removing cylinder, pump oil out of cylinder into
7. Carefully inspect internal surface of barrel for dam-
age (deep scratches, out-of-round, etc.). Replace entire
cylinderifbarrelisdamaged.Inspectpistonrod,andpis-
ton for evidence of excessive scoring, pitting, or wear.
Replace any damaged parts.
a drain pan by SLOWLY moving rod and piston in and
out of cylinder bore. Plug ports and clean outside of cyl-
inder.
2.
Mount cylinder in a vise so piston rod end of cylinder
is tilted up slightly. Do not close vise so firmly that cylin-
der tube could become distorted. Loosen gland.
Assembly (Fig. 55)
1.
Use a complete repair kit when rebuilding the cylin-
3.
motion to carefully extract piston, piston rod, and head
from cylinder barrel.
Grasp end ofpiston rod and use atwisting and pulling
der. Put a coating of oil on all new seals, and O-rings.
Install the new seal and O-rings.
2.
InstallpistonontopistonrodwithO-ringseal(10)and
4.
Securely mount piston, piston rod, and head into vise
tighten hex nut.
and remove nut. Remove piston.
3. Put a coating of oil on all cylinder parts to ease as-
sembly.
IMPORTANT: Do not clamp vise jaws against the
shaft surface. Protect shaft surface before mount-
ing in a vice.
4.
Slide piston rod assembly into cylinder tube and
install gland.
Reelmaster 6500-D/6700-D
Page 4 - 87
Hydraulic System
Product Specification
Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
---|---|
Tags | Toro Reelmaster 6500-D, Toro Reelmaster 6700-D |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Product Type | Walk Behind Mower |
Engine Manufacturer | Toro |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |