Leveling Front Roller
IMPORTANT: Toro strongly recommends the use of
a leveling plate when setting--up or adjusting any
reel type cutting unit. The leveling plate will help to
ensure accurate and consistent adjustments. Con-
tact your local Toro Distributor for ordering a level-
ing plate.
1.
Position cutting unit on a flat surface.
1
Note:
The bar thickness does not affect the adjust-
ment. The recommended bars keep the cutting unit
more balanced during the adjustment. Make sure the
barcoversthefulllengthofthereelbladesandtheouter-
most contact points between the reel and bar are equal
distances from the center of the reel.
2
Figure 16
1.
Flat Surface
(1” x 20” x 30”)
2.
Bar Stock
2.
Position a straight, parallel sided bar under the reel
blades and against the front edge of the bedknife
(Fig. 16). For 1” (25 mm) height-of-cut or below, a 3/4”
(19
mm) bar is recommended. For heights--of--cut
above 1” (25 mm), a 1--1/4” (32 mm) bar is recommen-
ded. Make sure bar covers the full length of the reel
blades.
3.
Rock cutting unit forward (on reel blades and steel
bar) until front roller contacts flat surface. Reel blades
and bedknife must maintain contact with bar. Rear roller
should not contact surface.
4.
Use a piece of newspaper or visually check to see if
any gap exists between front roller ends and flat surface
(Fig. 17). If needed, adjust front height-of-cut rods
until both ends of roller are in contact with level sur-
face.
Figure 17
Note:
If leveling the front roller causes the cutting unit
attitudetobedifferentfromsidetosidebymorethanone
degree, you may need to regrind the reel and/or bed-
knife to eliminate uneven wear.
Reelmaster 6500-D/6700-D
Page 7 - 11
Cutting Units
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro Reelmaster 6500-D, Toro Reelmaster 6700-D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Engine Manufacturer | Toro |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)