Reel Bearing Adjustment
Toinsurelonglifeofthereelbearings,periodicallycheck
ifreel end play exists. The reel bearings can be checked
and adjusted as follows:
Note:
Bearing and bearing housing were preset at
factory as indicated with a paint mark.
1.
knife adjusting knob counter--clockwise until no contact
exists (Fig. 32).
Loosen reel to bedknife contact by turning the bed-
2.
Hold on to the reel shaft and try to move the reel as-
Figure 33
sembly side to side (Fig. 33).
CUTTING UNIT SERIAL NO.
3.
If reel end play exists, proceeded as follows:
200000001
Thru 219999999
A. Loosen set screw securing bearing adjustment
nut to bearing housing located on the left side of the
cutting unit (Fig. 34 and 35).
2
1
B. Using special spanner wrench TOR4064, slowly
tighten the reel bearing adjustment nut until no end
play of the reel exists. If adjustment nut does not
eliminate reel end play, replace reel bearings.
Note:
Reel bearings do not require pre--load. Over
tightening reel bearing adjustment nut will damage reel
bearings.
4.
to bearing housing.
Retightensetscrewsecuringbearingadjustmentnut
Figure 34
1.
2.
Set Screw
Bearing Adjustment Nut
A. For socket head set screw (Fig. 34), tighten set
screw one-half turn beyond initial contact minimum.
CUTTING UNIT SERIAL NO.
220000001 & Up
B. For square head set screw (Fig. 35), tighten set
screw to a torque of 25 - 35 in-lb (29 - 40 KgCm).
1
1
2
Figure 35
1.
2.
Set Screw
Bearing Adjustment Nut
Figure 32
1.
Bedknife Adjusting Knob
Reelmaster 6500-D/6700-D
Page 7 - 21 Rev. E
Cutting Units
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro Reelmaster 6500-D, Toro Reelmaster 6700-D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Engine Manufacturer | Toro |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)