Run (ETR) Solenoid (Solenoid With 3 Wire Connector)
The solenoid must be energized for the engine to run. It
is mounted on the engine block near the injection pump.
1
In Place Testing
Note:
Prior to taking small resistance readings with a
digital multimeter, short the test leads together. The me-
ter will display a small resistance value (usually 0.5
ohms or less). This resistance is due to the internal re-
sistance of the meter and test leads. Subtract this value
fromfromthemeasured valueofthecomponent youare
testing.
1.
2.
of the black wire and the other lead to the pin of the
orange/red wire. The resistance of the pull coil should
be about 0.33 ohms.
Disconnect the connector from the solenoid.
Figure 27
(shown with hydraulic filter & bracket removed)
ETR solenoid
Using a digital multimeter, touch one lead to the pin
7.
6
3
3.
Using a digital multimeter, touch one lead to the pin
of the black wire and the other lead to the pin of the red/
blue wire. The resistance of the hold coil should be
about 12.2 ohms.
5
4
2
1
4.
Connect solenoid to the wiring harness.
Live testing
1.
Disconnect connector from the solenoid.
Figure 28
Note:
or tested in place.
The solenoid may be removed from the engine
1.
2.
3.
Cap screw
Fuel stop solenoid
Gasket
4.
5.
6.
Common (Black wire)
Hold coil (Red/blue wire)
Pull coil (Orange/red wire
2.
If the solenoid is removed from the engine, make
sure that the solenoid plunger moves freely and is free
of dirt, debris, and corrosion.
Note:
When testing run solenoid, use test leads with
at least 14 gauge wire.
3.
source to the pins of the red/blue and orange/red
Connect a positive (+) test lead from a 12 VDC
wires.
4.
source to the pin of the black wire. The solenoid should
Touch a negative (-) test lead from the 12 VDC
engage making an audible ”click”.
5.
orange/red wire. The solenoid should stay engaged.
Remove positive (+) voltage from the pin of the
6.
blue wire. The solenoid should release.
Remove positive (+) voltage from the pin of the red/
7.
Reconnect the wires to the solenoid.
Reelmaster 6500-D/6700-D
Electrical System (Rev. C)
Page 5 - 25
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro Reelmaster 6500-D, Toro Reelmaster 6700-D |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Engine Manufacturer | Toro |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)