2.
frontflange,body andrearcover for assembly purposes
(Fig. 75).
Use a marker to make a diagonal line across the
1
IMPORTANT: Avoid using excessive clamping
pressure on the motor flange to prevent damage.
3.
end down. Use of a vise with soft jaws is recommended.
Clamp front flange of motor in a vise with the shaft
4.
5.
6.
Loosen cap screws that secure rear cover.
2
Remove motor from vise and remove cap screws.
Removefrontflangefromthebody,thenremoverear
Figure 76
2.
1.
Motor body
Bearing block & gear set
cover. Locate and remove dowel pins from body.
IMPORTANT: Mark the relative positions of the gear
teeth and the bearing blocks so they can be re-
assembled in the same position. Do not touch the
gearsurfacesasresidueonhandsmaybecorrosive
to gear finish.
7.
block to remove bearing block and gear set (Fig. 76).
Place motor on its side and push on the rear bearing
NOTE: Pressure seals and back--up rings in Sauer--
Danfoss motors fit in grooves machined into front and
rear cover (Fig. 77). Pressure seals and back--up rings
in Bosch motors fit in grooves machined into bearing
blocks.
8.
Carefully remove and discard o--rings, pressure
seals and back--up rings from motor. Do not cause any
damage to the machined grooves during the removal
process.
Figure 77
IMPORTANT: Make sure not to damage the counter
bore when removing the shaft seal from the front
plate.
1
9.
retainer and shaft seal(s).
Position front flange with seal side up. Remove seal
2
10.On
Bosch motor, remove relief valves from rear cov-
er. Discard sealing washers.
Inspection
3
1.
Remove any nicks and burrs from all motor compo-
nents with emery cloth.
CAUTION
3
Use eye protection such as goggles when using
compressed air.
Figure 78
1.
2.
Drive gear
Idler gear
3.
Bearing block
Reelmaster 5010 Series
Page 4 -- 91
Hydraulic System
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 5210, Toro 5410, Toro 5510, Toro 5610 |
| Download File |
|
| Document Type | Catalog, Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Lawn and Garden readers have rated Toro 06148SL Rev B Reelmaster 5210 5410 5510 5610 Service Manual 4.0 out of 4.0 based on 1 product reviews. i hope is going to work