Indicator Lights
Glow Plug Indicator Light
4. Ground terminals 1B and 2B (Fig. 24).
5. Both indicator lights should illuminate.
The glow plug indicator light should come on when the
ignitionswitchisplacedintheRUNpositionpriortoplac-
ing the ignition switch in START. The light should stay lit
for approximately 6 seconds while the ignition switch is
left in the RUN position. The indicator light should also
be illuminated when the ignition switch is in the START
position.
6.
Connectharnesselectricalconnectortotheindicator
light.
7.
Arm Assembly in the Service and Repairs section ofthis
chapter).
Install control arm cover to machine (see Control
High Temperature Warning Light
If the engine coolant temperature reaches 221oF
(105
3
2
oC) (approximate), the high temperature warning
light should come on.
NOTE: When machine is in mow operation, high cool-
ant temperature will cause the cutting reels to shut off in
addition to warning light illumination.
4
1
Engine Oil Pressure Light
The engine oil pressure light should come on when the
ignition switch is in the RUN position with the engine not
running. Also, it should illuminate with the engine run-
ning if the engine oil pressure drops to an unsafe level.
Figure 23
1.
2.
Glow plug indicator
High temp warning
3.
4.
Engine oil pressure
Charge indicator
Totesttheoilpressurelightandcircuitwiring,groundthe
wire attached to oil pressure switch located on the en-
gine near the oil filter. Turn ignition switch to the RUN
position;theengineoilpressurelightshouldcome onin-
dicating correct operation of the indicator light and cir-
cuit wiring.
5
6
2
3
Charge Indicator Light
Thechargeindicatorlightshouldcomeonwhentheigni-
tionswitchisintheRUNpositionwiththeenginenotrun-
ning. Also, it should illuminate with an improperly
operating charging circuit while the engine is running.
1
4
Testing Indicator Lights
If testing of the indicator lights is necessary:
1
2
B (--)
B (--)
1A (+)
2A (+)
1.
Remove control arm covers to gain access to indica-
tor light and harness connectors (see Control Arm Dis-
assembly in the Service and Repairs section of this
chapter).
2.
the harness electrical connector from the light.
Locate theindicator light to betested anddisconnect
Figure 24
1.
2.
3.
Glow plug indicator
High temp warning
Engine oil pressure
4.
5.
6.
Charge indicator
Indicator light front
Indicator light back
3.
Apply 12 VDC to terminals 1A and 2A (Fig. 24).
Electrical System
Page 5 -- 24
Reelmaster 5010 Series
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 5210, Toro 5410, Toro 5510, Toro 5610 |
| Download File |
|
| Document Type | Catalog, Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Lawn and Garden readers have rated Toro 06148SL Rev B Reelmaster 5210 5410 5510 5610 Service Manual 4.0 out of 4.0 based on 1 product reviews. i hope is going to work