3.
Securefanshroudandradiatortoradiatorframe with
CAUTION
removed flange head screws and flange nuts. Make
sure that at least .250” (6.4 mm) clearance exists at all
points between shroud opening and fan.
Do not open radiator cap or drain coolant if the
radiator or engine is hot. Pressurized, hot cool-
ant can escape and cause burns.
4. Position coolant reservoir and brackets to the fan
shroud. Secure reservoir to fan shroud and radiator
frame with two (2) flange head screws and flange nuts.
Ethylene--glycol antifreeze is poisonous. Dis-
pose of coolant properly, or store it in a properly
labeled container away from children and pets.
5.
Place spacers (item 43) into holes in foam seal (item
Position foam seal and air intake screen (item 37)
42).
toradiatorframe. Secure screento machinewith five(5)
flange head screws and flange nuts.
3.
Drain coolant from radiator.
A. Slowly remove radiator cap from the radiator.
6. Connect upper and lower radiator hoses to radiator
and secure with clamps.
B. Place drain pan below the radiator draincock lo-
cated on the bottom of the radiator. Make sure that
drainpanislargeenoughto holdcoolingsystemcon-
tents (see Specifications in this Chapter).
7. Connect overflow hose to radiator fill opening and
secure with hose clamp.
8.
Makesure radiatordraincock isclosed (threadedout
C. Loosen draincock and allow coolant to drain from
radiator.
fully). Fill radiator with coolant.
9.
Lower hood. Install screen to rear of machine.
4.
5.
Remove screen from machine.
Disconnect radiator hoses (upper and lower) from
REELMASTER 5610
the radiator.
6
6.
Loosen hose clamp and remove overflow hose from
radiator fill opening.
5
3
7.
Remove two (2) flange head screws and flange nuts
that secure coolant reservoir and brackets to fan
shroud. Carefully position reservoir and brackets away
from the fan shroud.
1
8.
Remove five (5) flange head screws and flange nuts
2
that secure air intake screen (item 37) to machine. Re-
move screen and foam seal (item 42). Locate and re-
trieve five (5) spacers (item 43).
5
4
5
9.
cure fan shroud and radiator to radiator frame. Position
Remove flange head screwsand flangenuts that se-
fan shroud away from the radiator.
6
10.Carefully
pull radiator assembly from the machine.
Plug radiator and hose openings to prevent contamina-
tion.
6
11.
Inspect all foam seals placed between radiator, fan
shroud and radiator frame. Replace damaged foam
seals.
Figure 8
Installation (Fig. 7)
1.
2.
3.
Radiator (RM 5610)
Fan shroud
Radiator frame
4.
5.
6.
Flange head screw
Flange head screw
Flange nut
1.
Remove plugs placed in radiator and hose openings
during the removal procedure.
2.
support. Position fan shroud to the radiator.
Carefully position radiator assembly to the radiator
Reelmaster 5010 Series
Page 3 -- 13
Kubota Diesel Engine
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 5210, Toro 5410, Toro 5510, Toro 5610 |
| Download File |
|
| Document Type | Catalog, Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Lawn and Garden readers have rated Toro 06148SL Rev B Reelmaster 5210 5410 5510 5610 Service Manual 4.0 out of 4.0 based on 1 product reviews. i hope is going to work