6.
and each cutting unit side plate (Fig. 19).
Position a plastic washer (item 16) between bedbar
CAUTION
7.
Install the bedbar pivot bolt assemblies. Make sure
Contact with the reel, bedknife or other cutting
unit parts can result in personal injury. Use
heavy gloves when handling the bedbar.
that plastic washers are not caught on the threads of the
pivot bolts. Tighten each bedbar pivot bolt from 27 to 33
ft--lbs (37 to 44 N--m).
8.
Tighten both lock nuts (item 19) until outside metal
6.
7.
ings (item 14) in side plates for wear or damage. Re-
move bushings and replace if necessary.
Remove bedbar assembly from cutting unit.
washer just stops rotating. Do not over tighten the lock
nuts as this can distort the side plates and affect reel
bearing adjustment. The plastic washer between the
bedbar and side plate should be loose.
Inspect flange bushings (item 15) and rubber bush-
9.
er assembly until the adjuster spring is fully com-
pressed, then loosen lock nut 1/2 turn.
Tightenthe lock nut(item 13) on each bedbar adjust-
Bedbar Installation (Fig. 18)
1.
If rubber bushing was removed from either cutting
unit side plate, install a new bushing. The bushing
should be installed flush with the inside of the side plate
(Fig. 19).
10.Adjust
Manual).
cutting unit (see Cutting Unit Operator’s
11.
Install cutting unit to machine.
2.
If removed, install the flange bushings (item 15) with
flangefacingoutward.Applyantiseizelubricanttoinside
of flange bushing.
Antiseize
Lubricant
1
8
7
3.
Apply antiseize lubricant to the bedbar threads and
the shoulder area of each bedbar pivot bolt.
4.
washer (item 16) onto each bedbar pivot bolt.
Slide one metal washer (item 17) and one plastic
CAUTION
Contact with the reel, bedknife or other cutting
unit parts can result in personal injury. Use
heavy gloves when handling the bedbar.
3
6
4
4
5
2
Figure 19
5.
top ofeach bedbar arm isbetween washer (item 11)and
adjuster screw flange (item 10).
Position bedbar into cutting unit. Make sure that the
1.
2.
3.
4.
Cutting unit sideplate
Rubber bushing
Flange bushing
5.
6.
7.
8.
Washer (metal)
Bedbar
Bedbar pivot bolt
Lock nut
Washer (plastic)
Reelmaster 5010 Series
Page 7 -- 17
Cutting Units
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 5210, Toro 5410, Toro 5510, Toro 5610 |
| Download File |
|
| Document Type | Catalog, Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Lawn and Garden readers have rated Toro 06148SL Rev B Reelmaster 5210 5410 5510 5610 Service Manual 4.0 out of 4.0 based on 1 product reviews. i hope is going to work