Lift Lever Latch Adjustment (Fig. 14)
A lift lever latch that is positioned incorrectly can cause
the lift lever to hold the spool in an actuated position
when the implement is in the FLOAT position. This
causes oil in the hydraulic system to overheat. When lift
lever latch is adjusted correctly, the lift lever should just
clear the rounded part of the latch as lever is moved into
FLOAT position.
1.
2.
Unscrew ball from lift lever.
Remove self tapping screws and lift cover off
lift lever to expose the latch.
Loosen two capscrews on top of the lift lever latch.
3.
Figure 14
Place lever on rounded tip of latch, and slide latch
w/lever forward until stopping resistance is felt. Then
tighten capscrews to lock the latch in place. Check for
free operation of the lift lever by moving lever from
RAISE or TRANSPORT to FLOAT position. Lift lever
should just clear rounded position of latch as lever is
moved into FLOAT position.
1.
2. Rounded tab
Capscrews
3. Lift lever
4.
Slide cover into place and install it with self tapping
screws. Screw ball onto lift lever.
Groundsmaster® 300 Series
Page 5 - 25
Adjustments
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems