Plunger Type Switch (S/N 30001 and UP) (Fig. 27)
1. Disengage latches and remove instrument cover.
2. Disconnect negative battery cable from battery.
3. Move PTO lever forward to ON position.
4. Disconnect PTO switch electrical connector.
5. Remove boot from button end of switch. Keep boot
for installation later.
Figure 27
(S/N 30001 and UP)
6.
Remove front jam nut securing switch to mounting
bracket and remove switch.
1. PTO switch
7. Install new switch to mounting bracket. Adjust switch
so it is depressed 1/2" (13 mm) when PTO lever is
moved to OFF position. Tighten jam nuts to 75 in-lb.
Install rubber boot on switch.
IMPORTANT: Threads on PTO switch will be dam
aged if jam nuts are over-tightened.
8. Connect a continuity tester or ohm meter to switch
connector. With PTO lever in forward (ON) position, the
switch circuit should have no continuity. If there is con•
tinuity, check switch installation. If there is no continuity,
go to next step.
9. Move PTO lever to OFF position. When PTO lever is
in its normal, released position, the PTO switch should
have continuity. If there is no continuity, check switch
installation. If there is continuity, go to next step.
10. Push switch connectors together.
11. Install instrument cover and lock the latches.
Repairs
Page 6 - 34
Groundsmaster® 300 Series
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems