22.
Insert the LARGE tang of the drive link into the slot
in the rotor (Fig. 85).
IMPORTANT: An incorrect (reversed) assembly of
the drive link will prevent the assembly of the hex
drive.
Figure 85
Figure 86
Figure 87
23.
Grasp the drive link and rotate the metering package
by hand to make sure the parts do not bind (Fig. 86).
The rotor should orbit inside the stator. If they bind,
disassemble the metering package, correct the cause
and repeat the assembly and concentricity procedures.
24.
Apply clean multi-purpose grease to the metering
ring seal ring. Put the seal ring into position in the
metering ring seal groove opposite to the end with the
alignment pin holes. Stack the metering ring into place,
over the four bolts, with the seal ring towards the upper
cover plate. Make sure an alignment pin hole on the
metering ring is in line with and on the same side as the
alignment groove on the side of the upper cover plate
(Fig. 87). This is required so the other components can
be aligned correctly.
IMPORTANT: Make sure the seal ring does not slip
from position.
Groundsmaster® 300 Series
Page 8 - 43
Repairs
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 92801SL Rev I Groundsmaster 300 Series Groundsmaster 328 D Service Manual 5.0 out of 5.0 based on 2 product reviews. Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems