Center Section:
NOTE: Wing belts must be removed first.
1. Loosen capscrew nuts holding the spring bracket to
the deck. Loosen the threaded rod jam nut, then gradu-
ally loosen the tension nut to release the spring tension.
CAUTION
Loosen capscrew nuts holding the spring
bracket to the deck before loosening
threaded rod to avoid sudden movement of
the spring bracket.
2. With
guides as necessary and remove the belt.
belt tension released, remove idler arm and belt
Figure 25A
1. Threaded rod
2. Spring bracket nuts
3. Rubber stop
4. Tension nut
5. Jam nut
3.
pulleys. Replace and tighten the idler arm and guide.
Position new belt correctly in the center section
4. Be sure all belt guides are in the correct position and
secured to the deck and adjust belt tension by following
the procedure described above.
IMPORTANT: Check tension of new belts after initial
10 hours of operation.
IMPORTANT: If there is a gap of more than 3/16 inch
between the rubber stop and the idler arm a belt
adjustment is necessary.
IMPORTANT: Too much tension on the belt will
cause early belt failure.
Figure 25B
Repairs
Page 12 - 16
Groundsmaster® 300 Series
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 92801SL Rev I Groundsmaster 300 Series Groundsmaster 328 D Service Manual 5.0 out of 5.0 based on 2 product reviews. Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems