Belt Replacement (Fig. 22, 23, 24, 25)
Wing Sections:
1. Lower cutting unit to shop floor, turn off engine and
remove key. Remove belt covers.
NOTE: To remove center section belt, the wing section
belts have to be removed first.
2. With the wing unit raised, loosen nuts on capscrews
holding the spring bracket from under the deck.
NOTE: Block deck in raised position so that it cannot
accidentally lower while belts belt tension is being ad-
justed. Wings should be in lowered position.
3. With
spring tension relaxed, lower the wings. Loosen
or remove the idler pulley bolt to allow the belt to pass
between the belt guide and the idler pulley.
Figure 22
4. Loosen or remove belt guides as necessary to allow
removal of belts from remaining pulleys.
1. Spring bracket retaining nuts
5. Put new belt into correct position in groove of pulley
on center section and wing section of deck, then tighten
idler pulley boot.
6. Replace or reposition all belt guides and adjust belt
tension.
7. Adjust
wing pulley brake, then install covers.
IMPORTANT: Check new belt tension and brake
adjustment after initial 10 hours of operation.
Figure 23
1. Rubber bumper
3. Idler pulley bolt
2. Spring bracket
Figure 24
Groundsmaster® 300 Series
Page 12 - 15
Repairs
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems