6 - 8 ft-lb
12 - 20 ft-lb
Apply Loctite
12 - 20 ft-lb
Figure 13
Assembly
E. Tighten bolts (Item 1, 40) to a torque of 16 - 20 ft-lb
(220-280 Kg-Cm).
1. Use new gaskets and seals when reassembling axle.
2. Assemble differential case (Fig. 12):
F. Assemble clutch parts and install clutch cover
(Item 53). Install new oil seals (Item 54, 55).
A. Assemble differential. Use medium strength Loc•
tite on bolts (Item 7) and tighten evenly to a torque
of 20 - 24 ft-lb (270-330 Kg-Cm).
B. Assemble pinion gear (Item 30) and bearing case
(Item 38). Tighten bearing nut (Item 34) to pre-load
tapered roller bearings. Tighten so pinion shaft will
rotate with 2 - 5.5 in-lb (2.0 - 6.5 Kg-Cm) of torque.
Bend washer (Item 33) to prevent nut from loosen•
ing.
Tooth contact between bevel gear
and pinion with light load
C. Adjust tooth contact of bevel gear (Item 6) to
pinion (Item 30). Use shims (Item 29) to make good
contact with light load between bevel gear and pinion
(Fig. 13).
Figure 14
D. After adjusting tooth contact, use shims (Item 5)
to make backlash 0.003 - 0.01 in. (0.08 - 0.25 mm).
Check backlash through plug hole (Item 26) with a
dial indicator.
Groundsmaster® 300 Series
Page 10 - 9
Repairs
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 92801SL Rev I Groundsmaster 300 Series Groundsmaster 328 D Service Manual 5.0 out of 5.0 based on 2 product reviews. Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems