Lift Cylinder Removal and Installation (Fig. 33)
1.
Lower the cutting unit to the shop floor and turn the
engine off. Jack up the right front side of the traction unit
and support it with a jack stank. Remove the wheel nuts
and slide the wheel off of the mounting studs.
2.
Remove the hoses from the lift cylinder and cap the
hoses to prevent contamination.
3.
Remove the hair pin cotters andspring from the cotter
pin. Remove the mounting pins and slide the cylinder
from between the lift arm and the stationary mounting
bracket.
Figure 33
4.
Install the new or rebuilt cylinder with the pins and
assure the cotter pin which secures the moveable end
of the cylinder is to the outside. Hook the chain tension
spring through the eye of the cotter pin.
5.
Connect the hydraulic hoses from the control valve to
the cylinder.
6.
Install the wheel and tighten the nuts to 45 - 55 ft-lb.
Remove the jack stank and lower the deck to the shop
floor.
7.
Check the level of the hydraulic oil to be sure it is up
to the proper level. Start the engine and operate the lift
cylinder to remove air from the lines. Turn the engineoff.
8.
Check the level of the hydraulic oil again to be sure it
is up to the proper level.
9.
NOTE: The hydraulic fitting elbow located at the back
of the lift cylinder has a special orifice size to determine
the actuation speed of the cylinder. Always use the
proper Toro replacement part for this fitting to prevent
damage to the hydraulic system.
Groundsmaster® 300 Series
Page 5 - 41
Repairs
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 92801SL Rev I Groundsmaster 300 Series Groundsmaster 328 D Service Manual 5.0 out of 5.0 based on 2 product reviews. Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems