Mounting Cutting Unit to Traction Unit (Fig. 30, 31, 32, 33)
1.
Position machine on level surface and shut
engine off.
2. Move cutting unit into position in front of traction unit.
WARNING
Since the right hand push arm is spring
loaded to about 100 pounds and left hand
push arm is spring-loaded to about 150
pounds, another person is needed to help
push the push arm down. Sudden release of
the push arm could cause injury.
Figure 30
3. To assure correct alignment, measure from the end
of each push arm to the center line of the ball joint. Adjust
to 2-3/8 inches. If adjustment is required, leave the lock
nut loose.
1. Lock nut
2. Ball joint
3. Push arm
4. Have a helper carefully push down on left hand push
arm until holes in bracket line up with holes in caster
arm. Immediately slide a 4 x 4 inch block of wood
between top of push arm and under side of chassis.
5. Secure mounting bracket to caster arm with mounting
hardware. Tighten bolts to a torque of 45 ft-lbs. Tighten
lock nut where ball joint connects to lift arm.
WARNING
Figure 31
Make sure wooden block does not slip out
accidentally.
1. Mounting bracket holes
2. Carrier frame holes
3. Mounting hardware
6. Have a helper carefully push down on right hand push
arm until holes in bracket line up with holes in caster
arm. Immediately slide a 4 x 4 inch block of wood
between top of push arm and under side of chassis.
7. Secure mounting bracket to caster arm with mounting
hardware. Bolts should be tighten to 45 ft-lbs. Tighten
lock nut where ball joint connects to lift arm.
Figure 32
1. Right push arm ball joint
2. Mounting bracket
3. Mounting hardware
Groundsmaster® 300 Series
Page 12 - 21
Repairs
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 92801SL Rev I Groundsmaster 300 Series Groundsmaster 328 D Service Manual 5.0 out of 5.0 based on 2 product reviews. Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems