Gear Box Repair (Fig. 31, 32, 33)
Figure 31
Gear Box Disassembly
6. Remove bearing cups (Item 14) from cap by putting
a punch through the shaft bore and through the seal and
then tapping against the back of the bearing cup until
driven out of the cap.
1. Drain lubricant from gear box.
2. Remove capscrews and lift out shaft and cap assem•
blies.
7. If the oil seal (Item 13) is removed, it will be destroyed.
To remove the oil seal, cut it out of the bore with a screw
driver or chisel.
3. Remove cap assemblies and bearing cones (Item 12)
from shafts (Item 17, 19).
8. To remove the bearing cups (Item 3) from the housing
a slide hammer puller may be used, or if this is not
available, the bearing cups may be knocked out with a
punch by coming down through the opposite cap bore
and tapping against the back side of the bearing cup
until it comes out.
NOTE: Mark each gear (Item 10 and 18) so they are
installed on the proper shaft (Item 17 or 19) when
re-assembled.
4. Remove retaining rings (Item 7).
5.
Press shafts (Item 17, 19) back through bearing
9. Remove the plugs (Item 2) from the housing.
cones (Item 9). When bearing cone is free, gears (Item
10,
18), keys (Item 8) and shims (Item 11) may be
removed from the shaft.
Groundsmaster® 300 Series
Page 11 - 23
Repairs
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems