Rear Caster Wheel Bearing Service (Fig. 27)
The rear caster wheels rotate on high quality roller
bearings which are supported by spanner bushings.
Even after many hours of use, provided that the bearing
was kept well-lubricated, bearing wear will be minimal.
However, failure to keep bearings lubricated will cause
rapid wear. A wobbly caster wheel usually indicates a
worn bearing.
1. Remove capscrew and locknut holding caster wheel
and (2) washers between caster fork.
2. Pull spanner bushing out of wheel hub.
3. Remove bushing from wheel hub and allow bearing
to fall out. Remove bushing from opposite side of wheel
hub.
4. Check the bearing, spanner and inside of wheel hub
for wear. Replace defective parts.
Figure 27
5.
To assemble the caster wheel, push bushing into
wheel hub. Slide bearing into wheel hub. Push other
bushing into open end of wheel hub to captivate the
bearing inside the wheel hub.
6.
Carefully slide spanner through the bushings and
wheel hub.
7.
Install caster wheel assembly and (2) washers be-
tween caster fork, and secure all parts in place with
capscrew and locknut.
8. Lubricate caster wheel bearing through grease fitting,
using No. 2 general purpose lithium grease.
Repairs
Page 12 - 18
Groundsmaster® 300 Series
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems