Bleeding Air From the Injectors (Fig. 37)
This procedure should only be used if the fuel system
has been purged of air. (See Bleeding the Fuel System
in this section of the book.)
1. Loosen the pipe connection at the number 1 nozzle
and holder assembly on the cylinder head .
2. Move the throttle control to the FAST position.
3. Turn the ignition key to the START position to crank
the engine and pump fuel to the nozzles. Turn the
ignition key to the OFF position when a steady stream
of fuel flows out of the loose pipe connection.
4. Tighten the pipe connector.
Figure 37
5. Repeat steps 1 - 4 for the No. 2 and No. 3 injector
nozzle and holder.
Fuel Pump Service (Fig. 38)
The only serviceable parts of the fuel pump are the
magnet, filter, and the gaskets on each end of the filter.
1. Disconnect the fuel pump wires from the wiring har•
ness and ground connection.
2. Disconnect the fuel hoses from the pump. Plug the
fuel lines.
3. Remove the two screws which secure the pump to
the frame.
4. Use a 17 mm wrench to remove the cover from the
fuel pump. Remove the gasket, magnet and filter ele•
ment.
Figure 38
1. Cover
2. Cover gasket
3. Magnet
4. Filter
5. Body
Groundsmaster® 300 Series
Page 4 - 35
Fuel System Service
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 92801SL Rev I Groundsmaster 300 Series Groundsmaster 328 D Service Manual 5.0 out of 5.0 based on 2 product reviews. Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems