Installing the PTO Drive Shaft (Fig. 18, 19)
DANGER
Do not start the engine and engage the P.T.O.
lever when the P.T.O. shaft is not connected
to the gearbox on the cutting unit. If the en
gine is started and the P.T.O. shaft Is allowed
to rotate, serious Injury could result.
The P.T.O. Drive Shaft has two major components.
When replacing it on the machine, the spline shaft
portion attaches to the traction unit and the tube portion
attaches to the cutting unit gearbox.
IMPORTANT: The P.T.O. shaft yokes must be exactly
in line with each other when the outer P.T.O. sleeve
is installed on the splined shaft. Remove the sleeve
and change the yoke position if alignment is not
correct. Misalignment of the yokes will shorten the
life of the P.T.O. Drive Shaft assembly and cause
unnecessary vibration when the cutting unit is op
erated.
Figure 18
1. Line up the holes in the yoke and the input shaft of
the gearbox. Slide the yoke onto the shaft and secure
the parts together with the roll pin.
2. Mount the P.T.O. shield over the input shaft and onto
the gearbox mounting plate with the two self-tapping
screws.
Figure 19
1. PTO yoke
3. Roll pin
2. Yokes in phase
4. Capscrews & locknuts
Repairs
Page 9 - 14
Groundsmaster® 300 Series
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems