13.
Assemble the bearing retainer bolts to the axle
housing. Apply a 0.625 in. (16 mm) bead of gasket
material to flange on end of axle housing, then install
the axle shaft assembly into the axle housing. Be careful
not to damage the oil seal and bearing. Line up the
holes of the brake assembly and oil seal. Push the axle
shaft as far as possible into the axle housing (Fig. 17).
Wheel end gasket material: P/N 92-8775 Liquid Gasket Kit
(Kit contains Loctite Ultra-Gray
gasket eliminator and instructions.
Make sure surface
is flat. File off any
high spots.
Make sure capscrews
are flat against flange.
Grind off any material
from tube that interferes.
Figure 17
Socket Hd Screw
(94-6934)
14.
Start the nuts by hand. Tighten the nuts so the
bearing assembly is drawn evenly into the axle housing
(Fig. 18). NOTE: It is recommended that you replace
hex head screws and flange nuts with socket head
screws, washers and nuts (Fig. 18). If installing socket
head screws, tighten the nuts to a torque of 16 - 20 ft.-lb.
Nut (94-6935)
Washer (94-6936)
(2
- 3 Kgm). If reinstalling hex head screws, tighten the
nuts to a torque of 37 - 45 ft.-lb. (5 - 6 Kgm).
IMPORTANT: Hold the socket head screw or hex
head screw when tightening the nut to prevent the
head from turning into the tube radius.
Hold socket head screw and tighten
nut to 16 - 20 ft-lb (2 - 3 Kgm)
Figure 18
Differential and Housing Disassembly
1.
Remove the right andleft-hand axleassemblies. (See
Axle Shaft Disassembly and Wheel Bearing Service in
this section of the book.)
Remove the eight (8) housing cap screws and separate
the upper and lower axle housings (Fig. 19). Clean the
gasket material from the mating surfaces before reas•
sembly.
NOTE: A complete Upper Housing Assembly for Dif•
ferential repairs is available. Using this assembly
eliminates the need for “trial and error” shimming pro•
cedures to establishthe correct contact pattern between
ring and pinion gears.
Figure 19
Repairs
Page 7 - 8 Rev. A
Groundsmaster® 300 Series
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 92801SL Rev I Groundsmaster 300 Series Groundsmaster 328 D Service Manual 5.0 out of 5.0 based on 2 product reviews. Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems