3.
Put the upper cover and jacket on the four bolts with
the jacket tube pointing down through the hole in fixture
(Fig. 66). Make sure the square shoulder of the bolts
engage the square holes in the upper cover.
4.
Apply a small amount of multi-purpose grease to the
recessed face of the retainer plate and washer. Put the
retainer plate into the upper cover & jacket with the
recessed retainer face out. Put the washer against the
recessed face of the retainer plate.
Figure 66
5.
Install the snap ring onto the input shaft if it was
removed (Fig. 67).
Figure 67
6.
Slide the input shaft into the upper cover end of the
upper cover & jacket and through the bushing until the
retaining ring bottoms against the washer. Make sure
the washer bottoms against the retainer plate recessed
face and the retainer plate seats against the end of the
jacket tube (Fig. 68).
Figure 68
7.
Install the upper cover plate over the four bolts with
the highly polished surface up (Fig. 69).
IMPORTANT: The alignment grooves must be all on
one side of the steering valve for proper operation.
Figure 69
Groundsmaster® 300 Series
Page 8 - 37
Repairs
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 92801SL Rev I Groundsmaster 300 Series Groundsmaster 328 D Service Manual 5.0 out of 5.0 based on 2 product reviews. Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems