Push Arm and Torsion Spring Service (Fig. 22, 23, 24, 25, 26, 27, 28)
Removing Push Arms,
Torsion Springs and Bushings
1. Separate cutting unit from traction unit and roll cutting
unit away from traction unit.
2. Have a helper push down on the left push arm while
you put a 4" x 4" block of wood between the chassis and
the top of the push arm, and across the full width of the
machine.
3. Loosen the large jam nut on the left-hand ball joint at
the end of the push arm. Remove the ball joint (mount
attached) from the push arm.
Figure 22
Figure 23
Figure 24
4.
plate to the main frame. Raise the floor plate and set it
aside.
Remove the self-tapping screws holding the floor
5. Disconnect the right-hand brake cable from the brake
strut. Remove the jam nut holding the brake cabled in
the mount on the frame and slide the cable through the
hole in the push arm bracket.
6. Remove the cotter
brake rod. Slide the rod out of the latch.
pin from the end of the parking
Repairs
Page 11 - 18
Groundsmaster® 300 Series
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems