Steering Valve Removal and Installation
1.
Engage the parking brakes, lower the cutting units to
the ground, turn the engine OFF and remove the key
from the ignition switch.
2.
3.
4.
Remove the cutting unit or other implement.
Remove the steering wheel.
Remove the six (6) self-tapping screws securing the
steering tower cover (Fig. 23A). Slide the steering tower
cover off of steering column and parking brake rod.
5.
Clean outside of the steering valve and the area
around the hydraulic fittings. Disconnect hydraulic
hoses from steering valve. Put caps or plugs on all
fittings and hoses to prevent contamination.
NOTE: To ease reassembly, tag each hose and tube line
to show their correct position on the steering valve.
6.
securing steering column to column support (Fig. 23B).
Remove two (2) capscrews to remove clamp half
Figure 23A
1.
2.
Steering column cover
Steering column
3. Self tapping screws
4. Parking brake knob
7.
steering valve to mounting bracket.
Remove four (4) locknuts and flat washers securing
8.
Carefully move hydraulic lines to the side and pull
steering valve and column out through bottom of steer•
ing tower.
9.
Reverse steps 2 - 8 to install the steering valve.
Figure 23B
1.
2.
3.
Column support
Clamp half
Mounting bracket
4. Steering column
5. Valve
6. Pivot plate
Groundsmaster® 300 Series
Page 8 - 21
Repairs
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems