Adjustments
Mechanical Door (Fig. 3)
On each side of the deck center section is a mechanical
door that opens and closes as the wing sections are
lowered and raised. The doors open to provide overlap
of the cutter blades when the wing units are down. The
doors close to provide safety and protection when the
wing units are raised.
To adjust mechanical door, disconnect threaded rod
from the door by removing cotter pin. Loosen the jam
nut and turn the rod in or out so that the bottom of the
door is 1/4 inch up from the bottom of the deck side
panel when the wing is fully raised. Tighten jam nut and
install the cotter pin.
Figure 3
1. Threaded rod
2. Mechanical door
3. Cotter pin
4. Jam nut
5. 1/4" (6 mm) gap
Skid and Roller Adjustment (Fig. 4, 5)
When height of cut is set or changed, skids and anti•
scalp rollers should also be adjusted (adjust on a hard
level surface).
1 inch height of cut – skids all the way up.
1-1/2 inch
height of cut – skids 3/8 inch to 1/2 inch
off the ground.
2-1/2 inch height of cut – skids all the way down.
Figure 3
1. Skid adjustment
2. Anti-scalp roller adjustment
When height of cut is set at 1 to 1-1/2 inches, the center
anti-scalp roller and the two ball rollers on the front of
the deck should be in the upper position. when the
height of cut is 2 to 4 inches the rollers should be in the
lower position.
Figure 3
1. Center anti-scalp roller
2. Upper and lower holes
Groundsmaster® 300 Series
Page 12 - 5
Adjustments
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 92801SL Rev I Groundsmaster 300 Series Groundsmaster 328 D Service Manual 5.0 out of 5.0 based on 2 product reviews. Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems