34.
Remove the drive link spacer (Fig. 50). Replace it if
it grooved or worn.
35.
With the rotor set lying on the drive plate, the rotor
should rotate and orbit freely within the stator. The
commutator side of the stator face must be free of
grooves or scoring.
NOTE: the rotor and stator are a matched set. You must
replace them as a matched set, if either is worn or
damaged.
Figure 50
Figure 51
Figure 52
36.
Check the rotor lobe “tip” to stator lobe “tip” clear•
ance, with a feeler gauge (Fig. 51). The rotor lobe,
directly across from the rotor lobe tip being measured
(see pointer in Fig. 51) must be centered between stator
lobes during the measurement. A rotor and stator that
exceeds the maximum allowable “tip” clearance, must
be replaced.
Max. rotor to stator “tip” clearance: 0.003 in. (0.08 mm)
37.
plate side of the rotor set also must be free of grooves
or scoring.
Remove the rotor set from the drive plate. The drive
NOTE: Handle the rotor set carefully to avoid nicks and
scratches.
38.
the “normal” spiral pattern due to rotor movement.
The rotor sideof the drive plate (Fig. 52)shouldshow
Groundsmaster® 300 Series
Page 8 - 31
Repairs
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 92801SL Rev I Groundsmaster 300 Series Groundsmaster 328 D Service Manual 5.0 out of 5.0 based on 2 product reviews. Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems