Center Section:
NOTE: Spring tension is only 10 to 15 lbs. on the wing
section, but is 80 to 90 lbs. on the center section,
requiring the use of a threaded rod for adjustments.
1. Loosen nuts securing the spring bracket to the deck.
Loosen the jam nut on the threaded rod.
2. Adjust the spring bracket so that the lip on the spring
bracket just contacts the rubber stop on the idler arm.
Use the threaded rod to make belt adjustments. Tighten
the capscrews and nuts securing the spring bracket in
position and tighten the jam nut on the threaded rod.
3. Be sure all belt guides are in the correct position and
secured to the deck before operating the cutting unit.
Figure 13
IMPORTANT: If there is a gap of more than 3/16 inch
between the rubber stop and the idler arm a belt
adjustment is necessary.
1. Threaded rod
4. Tensioning nut
5. Jam nut
2. Spring bracket nuts
3. Rubber stop
IMPORTANT: Too much tension on the belt will
cause early belt failure.
Adjustments
Page 12 - 10
Groundsmaster® 300 Series
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 92801SL Rev I Groundsmaster 300 Series Groundsmaster 328 D Service Manual 5.0 out of 5.0 based on 2 product reviews. Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems