5.
knuckle pin. Remove the gasket and any remaining gas-
ket material from either mating surface (Fig. 6).
Remove the knuckle pin mounting screws and the
17 to 20 ft–lb
(23 to 27 N–m)
1
3
6.
per end of the bevel gear shaft out of the upper bearing
and upper bevel gear.
While holding the bevel gear case, lightly tap the up-
Threadlocking
Compound
5
7.
move the upper bevel gear, collar, spacer, and thrust
washer from the gear case.
Pull the bevel gear case from the axle case and re-
4
7
9
2
13
8.
O-ring from the axle case.
Remove the axle case cover screws, cover, and the
8
10
9.
Remove the plug and sealing washer from the center
of the axle case cover. While holding the axle case cov-
er, lightly tap the lower end of the bevel gear shaft out of
the lower bearing and lower bevel gear.
6
15
10.Remove
and discard bevel gear shaft seals from
bevel gear case and axle case (Fig. 6).
11
12
14
17
(23
to 20 ft–lb
to 27 N–m)
Figure 6
1.
Knuckle pin
Shaft seals
O–ring
9. Upper bevel gear
10. Thrust washer
11. Lower bevel gear
12. Lower bearing
13. Axle case
14. Axle case cover
15. O-ring
2.
3.
4.
5.
6.
7.
8.
Bevel gear case
Upper bearing
Bevel gear shaft
Collar
Spacer
Inspection
1.
port bushing I.D. to determine the bushing to pin clear-
ance (Fig. 7). Replace components as necessary.
Measure the knuckle pin O.D. and the axle case sup-
1
2
BUSHING TO PIN CLEARANCE:
0.002
to 0.016 in. (0.05 to 0.40 mm)
KNUCKLE PIN O.D. (Factory Spec.):
0.982
to 0.983 in. (24.95 to 24.98 mm)
AXLE CASE SUPPORT BUSHING I.D.
(Factory Spec.):
0.984
to 0.987 in. (25.00 to 25.08 mm)
Figure 7
2. Axle case support
1.
Knuckle pin
2.
ers for damage and wear. Replace components as nec-
essary.
Inspect all gears, shafts, bearings, cases, and cov-
Groundsmaster 328–D
Page 10.1 – 7
4WD Rear Axle (Rev. G)
(Dae Dong Axle)
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 92801SL Rev I Groundsmaster 300 Series Groundsmaster 328 D Service Manual 5.0 out of 5.0 based on 2 product reviews. Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems