Engine Oil Pressure Switch (Fig. 20)
The oil pressure switch is located on the cylinder block
and has a brown wire attached. The switch is normally
closed (NC) and opens with pressure.
Turn ignition key switch ON. Oil pressure lamp and
buzzer should be on.
If lamp and buzzer are not on:
1. Disconnect wire from oil pressure switch and touch
wire to a good ground, such as the engine block.
2. If lamp and buzzer come on, replace switch.
3.
If lamp and buzzer do not come on check wiring
Figure 20
between switch, lamp and buzzer for continuity.
If lamp and buzzer are on with engine running:
1. Shut off engine immediately.
2.
Check switch by disconnecting wire with ignition
switch in ON position. Light should go out.
3. If light is still on, check for short circuit in wiring.
4. Install test gauge in engine oil pressure switch port.
Start engine and check oil pressure. If engine oil pres•
sure is good, replace switch. If engine pressure is low,
DO NOT operate the engine.
Testing
Page 6 - 28
Groundsmaster® 300 Series
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems