9.
Use a depth gauge to measure the distance from the
end face of the input shaft/pinion gear to the mating sur-
face of the bearing case. Subtract the “Design Cone
Center Distance” from this distance to determine initial
shim thickness (Fig. 20).
Design
Cone Center
Distance
1
DESIGN CONE CENTER DISTANCE
(distance from mating surface of axle support to end
face of pinion gear):
1.870
+ 0.002 in. (47.5 + 0.05 mm)
2
NOTE: Bearing case shims are available in 0.004 in.
(0.1
mm) and 0.008 in. (0.2 mm) thickness.
a new O-ring with grease. Place shims on the
10.Coat
bearing case and temporarily install input shaft/pinion
gear assembly into axle case. Tighten mounting screws
to 35 to 41 ft-lbs. (47 to 56 Nm).
Figure 20
1.
Input shaft/pinion gear
2.
Bearing case
11.
Insert a screwdriver through the drain plug hole to
hold ring gear and measure the pinion gear to ring gear
backlash (Fig. 21).
1
PINION GEAR TO RING GEAR BACKLASH:
0.004
to 0.016 in. (0.10 to 0.40 mm)
12.Adjust
case shim thickness.
backlash by increasing or reducing bearing
3
2
13.Check
pinion gear to ring gear engagement (see Pin-
ion Gear to Ring Gear Engagement in this section of this
manual.
4
35
to 41 ft–lbs.
to 56 Nm)
14.Place
ing case. Tighten mounting screws to 35 to 41 ft-lbs. (47
to 56 Nm).
the correct combination of shims on the bear-
(47
Figure 21
1.
2.
Axle case
Screwdriver
3.
4.
Dial indicator
Input shaft/pinion gear
Groundsmaster 328–D
Page 10.1 – 13
4WD Rear Axle (Rev. G)
(Dae Dong Axle)
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(2 votes, average: 5 out of 5) Lawn and Garden readers have rated Toro 92801SL Rev I Groundsmaster 300 Series Groundsmaster 328 D Service Manual 5.0 out of 5.0 based on 2 product reviews.
Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems