11. Before pressing pinion out of housing:
If unit was equipped with an expansion plug (re•
moved in step 10), remove the snap ring and shim
from the end of the pinion (Fig. 29).
If unit is equipped with a flange for 4WD (no expan•
sion plug), nut, washer and flange (Fig. 3C) must be
removed before pressing pinion out of housing.
Figure 29
Figure 30
Figure 31
12. Position the housing assembly on a suitable press.
Place a 1/8 inch (3 mm) piece of steel or a screwdriver
blade under the edge of the spur gear. This will prevent
the spur gear from cocking and possibly cracking the
housing (Fig. 30).
When the pinion is close to being pressed completely
out of the bearing, reach under the housing and catch
the pinion in your hand to prevent any damage to the
pinion.
Removing the drive pinion releases the spur gear,
spacer, and outer pinion bearing for removal (Fig. 31).
If unit was equipped with a flange for 4WD (no expan•
sion plug), remove oil seal from housing (Fig. 3C).
Repairs
Page 7 - 12
Groundsmaster® 300 Series
Product Specification
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro Groundsmaster 300, Toro Groundsmaster 328 D, Toro Groundsmaster 92801SL |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
Need 328D. Manual pdf. Will rate after finding manual
t has been a very reliable machine but getting parts is hard and not cheap to buy , generic parts has been cost effective and reliable , i am unable to get a wiring circut diagram for this unit as most problems are electrical problems